EW20 Portable Solar Powered Flashlight 3W Led Bulbs Convenient
Installation
Idea behalf on science and technology are primary productive
forces, is the basic enterprise development.
Insisting on the spirit of the honest, creation and development,
dealing with variety and nicety solar products, principle of
miracle function and funny out looking, absorbed in high quality
and developing friendly cooperation.
1. 1.7W*2/9V polycrystalline solar panel with 3m cable
2. Built-in 4.5Ah/6V maintenance free lead acid battery
3. 1pc 1 to 10 mobile charging cable
4. 1pcs 3W led bulbs in 3m cable with switch
5. system package size:190*140*152, weight: 1.7kg
karton size:580*426*325, weight: 18kg, 10pcs
EW20 portable solar light led rechargeable camping lantern good for
home or camping
1. Product Description
LFS-MSP20 is a mini solar lantern with built-in LED lamp, reading
light and extra Led bulb. It is especially design for rural
villages lack of electricity, for home illumination, people's
reading and camping at night. It has five levels rightness, and USB
output to charge mobile phone. The lantern uses intelligent micro
controller inside, has short-circuit, overcharge, over discharge
protections
- 1.7W*2/9V polycrystalline solar panel with 3m cable
- Built-in 4.5Ah/6V maintenance free lead acid battery
- 1pc 1 to 10 mobile charging cable
- 1pcs 3W led bulbs in 3m cable with switch
- system package size:190*140*152, weight: 1.7kg
- karton size:580*426*325, weight: 18kg, 10pcs
2.Specification
| Item | Specification | Remark |
| Solar panel | 7W/9V*2pcs. 3m cable with DC and USB connectors | Polycrystalline |
| Battery | 4500mAh/6V | Lead acid |
| Light source | 9pcs of LEDs ( 8pcs+ 1 reading light) | 5-level brightnes |
| socket button | switch | on/off 5-level brightnes |
| battery indicatiors | battery/ charging display |
| USB 5V output | for extra LED bulb and mobile phone |
| DC 6V input | soalr input |
| external components | 1W LED bulb with 3m cable and USB connector | 9 pcs LED s |
| USB 10 in 1 mobile charger cable | For mobile phone |
| AC charger adapter | (optional) |
3. Operating Instructions:
a. Please fully charge the lantern before first use. Make sure the
4pcs battery indicators stop flashing to indicate full charge.
b. The switch is not only used to turn the lantern on and off, but
also used to select the required brightness levels. Brightest Light
will lower the lantern working time. On the other hand, Bed Light
has longest working time, but it is too gloomy for reading books or
home illumination. Therefore, it is very important to select
suitable brightness
level according to your request and using situation.
c. Press the switch once to turn on the lantern, and 4pcs indicators
start working.
d. Single press one after another to select brightness levels in
sequence: Bright→Brighter→Brightest→ Reading light(1pc led)→Bed
light. Only one brightness level at each time.
e. One more press after Bed Light to turn off the lantern, and 4pcs
indicators stop working after 2 seconds automatically.
f. The lantern enters into low consumption state automatically when
without load, all indicators extinguish. Its non-load consumption
less than 0.2mA.
g. Insert the extra LED bulb cable to the USB socket, then turn on
its individual switch to start lighting.
h. Insert the 10-in-1 mobile charger cable to the USB socket, will
charge mobile phone automatically.
i. Solar panel cable has extra USB female connector, can charge
mobile phone directly when solar panel is under direct sunshine at
daytime.
Battery Capacity
(mAh/6V) | Charging Time
via 2*1.7W/9V panel (Hours) | Brightness Setting | Working Time on Full Battery(Hours) |
| 4500 | 13 | Bright | 60 |
| Brighter | 30 |
| Brightest | 15 |
| Reading light | 75 |
| Bed light | 100 |
| 1W LED bulb | 16 |
4. Charging Instructions:
- Plug solar panel cable into lantern input socket.
- Expose solar panel to sunlight. Proper orientation without any
shadow falling on the panels will optimize the charging current and
will charge the battery at a quicker rate.
- Plug AC adaptor cable into lantern input socket, use AC electricity
to charge. (Optional)
- The lantern can charge and discharge independently at the same
time, but suggest to turn off it and not to connect any devices
when being charged, so as to speed up charging time.
5. Solar Battery Indicators:
- When lantern battery is empty and under charging, all 4pcs battery
indicators keep flashing one after another circularly. Then changes
to 3pcs→2pcs→1pc indicators keep flashing; 1pc→2pcs→3pcs stay
lighting always accordingly. When all 4pcs indicators on, to
indicate battery is fully charged.
- All 4pcs indicators on, to show 100% power left. 3pcs indicators on
means 75% power, 2pcs indicators on means 50% power. When only 1pc
indicator on, the battery has low energy left and needs charging
soon.
- When using lantern, if battery voltage lower than 5.5V, the lowest
indicator starts flashing, but the built-in LED lamp can keep on
working for a short time. When battery voltage lower than 5V, the
built-in lamp stops working, and the lowest indicator keeps on
flashing for 15 seconds, then extinguish automatically.
- When battery is empty, you can not turn on the lamp even press the
switch, but the lowest indicator starts flashing for 2 seconds,
then extinguish automatically.
6. For Best Performance:
- Place solar panel directly to sunlight to absorb enough sunshine.
- Keep solar panel surface clean always, and avoid scratching.
- Store solar panel indoor when not in use, to protect against thief
or damage due to bad weather.
- Keep the lantern away from sunshine during charging, in order to
increase charge rate and protect battery lifespan.
7. Battery Maintenance:
- Immediately charge the battery after completed discharging.
- Never leave the battery in an empty state.
- Recharge the battery every 2 months, even it is fully charged when
stop using it.
- When replacing the battery, MUST use 6V sealed lead acid
rechargeable battery, the same size.
